D-Link DWC-1000 [330/368] Enablethetrapasdesired refertothetablebelow 3 click save

D-Link DWC-1000 User Manual 330

Section 9 - Maintenance

2. Enablethetrapasdesired(refertothetablebelow).

3. Click Save.

Field Description

AP Failure Traps

If you enable this eld, the SNMP agent sends a trap if an AP fails to associate or

authenticate with the controller

AP State Change Traps

Ifyouenablethiseld,theSNMPagentsendsatrapforoneofthefollowingreasons:

•ManagedAPDiscovered

•ManagedAPFailed

•ManagedAPUnknownProtocolDiscovered

•ManagedAPLoadBalancingUtilizationExceeded

Client Failure Traps

Ifyouenablethiseld,theSNMPagentsendsatrapifawirelessclientfailstoassociate

orauthenticatewithanAPthatismanagedbythecontroller.

Client State Change Traps

Ifyouenablethiseld,theSNMPagentsendsatrapforoneofthefollowingreasons

associated with the wireless client:

•ClientAssociationDetected

•ClientDisassociationDetected

•ClientRoamDetected

Peer Controller Traps

Ifyouenablethiseld,theSNMPagentsendsatrapforoneofthefollowingreasons

associated with a peer controller

•PeerControllerDiscovered

•PeerControllerFailed

•PeerControllerUnknownProtocolDiscovered

•Congurationcommandreceivedfrompeercontroller.(Thecontrollerdoesnot

needtobeClusterControllerforgeneratingthistrap.)

RF Scan Traps

Ifyouenablethiseld,theSNMPagentsendsatrapwhentheRFscandetectsanew

AP,wirelessclient,orad‐hocclient.

Rogue AP Traps

Ifyouenablethiseld,theSNMPagentsendsatrapwhenthecontrollerdiscoversa

rogueAP.TheagentalsosendsatrapeveryRogueDetectedTrapIntervalsecondsif

anyrogueAPcontinuestobepresentinthenetwork.