D-Link DWC-1000 [149/368] Dynamic dns

D-Link DWC-1000 User Manual 149

Section 5 - Advanced Network Conguration

Dynamic DNS

Path:Network>Internet>DynamicDNS

DynamicDNS(DDNS)isanInternetservicethatallowscontrollerswithvaryingpublicIPaddressestobelocated

using Internet domain names. To use DDNS, you must setup an account with a DDNS provider such as DynDNS.

org, D-Link DDNS, or Oray.net.

EachconguredOptionportcanhaveadierentDDNSserviceifrequired.Oncecongured,thecontrollerwill

updateDDNSserviceschangesintheOptionIPaddresssothatfeaturesthataredependentonaccessingthe

controller’sWANviaFQDNwillbedirectedtothecorrectIPaddress.WhenyousetupanaccountwithaDDNS

service, the host and domain name, username, password and wildcard support will be provided by the account

provider.

To congure DDNS:

1. Click Network > Internet > Dynamic DNS

2. Click the tab on top to select which Option port you want to congure DDNS to.

3. Next to Dynamic DNS Service Type, select your DDNS service.

4. EnterthefollowinginformationandclickSave. The information below is for DynDNS. Other services

will have similar elds.

Field Description

User Name EnteryourDDNSusername.

Domain Name Enterthedomainname.

Password EnteryourDDNSpassword.

Status Displays the current connection status.

Allow Wildcards Toggle to ON to allow wildcards.

Update Periodically Toggle to ON to set a forced update.

Save Click Save to save your reservation.