D-Link DWC-1000 [334/368] Restoring factory default settings

D-Link DWC-1000 User Manual 334

Section 9 - Maintenance

Restoring Factory Default Settings

Path:Maintenance>Firmware>SoftReboot

If youresetawirelesscontrollertoits factorydefault settings,it returnstothe statewhen itwas new— all

changesyoumadetothedefaultcongurationarelost.Examplesofsettingsthatgetrestoredincludecritical

thingsyouneedtogetonline,suchasloginpassword,SSID,IPaddresses,andwirelesssecuritykeys.

There are two ways to restore a wireless controller to its original factory default settings:

• Usethe reset button on the back of the wireless controller(see“Usingthe Reset Button to Restore

DefaultSettings”onpage341).

• Usethewebmanagementinterfaceinstructionsbelow.

1. Click Maintenance > Firmware > Soft Reboot.

2. Next to Factory Default settings, click the Default button.

3. At the conrmation message, click OKtorestorefactorydefaultsettings;orclickCancel to retain your

current settings.

Note: After restoring the factory default conguration, the wireless controller’s default LAN IP address is 192.168.10.1,

the default login user name is admin, and the default login password is admin.