Tohatsu MFS 30 — проверка и тестирование работы двигателя: пошаговое руководство [25/319]

Превью страниц Страница 25 / 319

1-15

25/30 2006

6. Test Run

1. Start engine and check if gear shift can be made smoothly.

2. After completing warm-up operation, check idling revolution

speed.

Complete test run during break-in operation.

7. Checks After Test Run

1. Check that no water is present in gear oil.

2. Check that no fuel leaks in the cowl.

3. Check that no oil and water leak in the cowl and no water is

present in engine oil.

4. After test run, use flushing kit and fresh water to wash

cooling water path by idling engine.

Dead Slow Revolution Speed :

850±30 r/min

RPM

4. Run at 2,000 r/min or half of WOT for initial 2 hours, then at

3,000 r/min or 3/4 of WOT for 1 hour.

5. Check that shifting into reverse (R) will not tilt up outboard

motor and allow water to run into boat.

3. Shift gear into forward (F) and run dead slow for

approximately 10 minutes.

1 High Tension Cord

Idling Revolution Speed :

850±30 r/min

RPM

Tachometer :

P/N. 3AC-99010-0

MFS25_30_ch01.qxd 06.3.9 4:30 PM ページ 15