Home
Главная
Ryobi
Цепная пила
RCS2040
Инструкция по эксплуатации Страница: 16

Ryobi RCS2040 [16/248] English original instructions

Deutsch (Übersetzung der originalen Anleitungen)

English (Original instructions)

is released, the spring loaded limb may strike the

operator and/or throw the chain saw out of control.

 Use extreme caution when cutting brushes and

saplings. The slender material may catch the saw

chain and be whipped toward you or pull you off

balance.

 Carry the chain saw by the front handle with the chain

saw switched off and away from your body. When

transporting or storing the chain saw always fit the

guide bar cover. Proper handling of the chain saw will

reduce the likelihood of accidental contact with the

moving saw chain.

 Follow instructions for lubrication, chain tensioning

and changing accessories. Improperly tensioned or

lubricated chains may either break or increase the

chance for kickback.

 Keep handles dry, clean, and free from oil and

grease. Greasy, oily handles are slippery and can

causing the loss of control.

 Cut wood only. Do not use chain saw for purposes

not intended. For example: do not use the chain saw

for cutting plastic, masonry or non-wood building

materials. Use of the chain saw for operations

different than intended can result in a hazardous

situation.

 Causes and operator prevention of kickback

a) Kickback may occur when the nose or tip of the

guide bar touches an object, or when the wood

closes in and pinches the saw chain in the cut.

b) Tip contact in some cases may cause a sudden

reverse reaction, kicking the guide bar up and

back towards the operator.

c) Pinching the saw chain along the top of the

guard bar may push the guide bar rapidly back

towards the operator.

d) Either of these reactions may cause you to lose

control of the saw which could result in serious

injury. Do not rely exclusively upon the safety

devices built into your saw. As a chain saw user,

you should take several steps to keep your

cutting jobs free from accident or Injury.

e) Kickback is the result of tool misuse and /or

incorrect operating procedures or conditions and

can be avoided by taking proper precautions as

given below:

1) Maintain a firm grip, with thumbs and fingers

encircling the chain saw handles, with both

hands on the saw and position your body

and arm to allow you to resist kickback force.

Kickback forces can be controlled by the

operator, if proper precautions are taken. Do

not let go of the chain saw.

2) Do not overreach and do not cut above

shoulder height. This helps to prevent

unintended tip contact and enables better

control of the chain saw in unexpected

situations.

3) Only use replacement bars and chains

specified by the manufacturer. Incorrect

replacement bars and chains may cause

chain breakage and/or kickback.

4) Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead

to increased kickback.

 It is recommended to use a residual current device

with a tripping current of 30mA or less.

 Ensure that the power cord and the extension cord of

the chain saw cannot become entangled in branches

or any other objects during the usage of the chain

saw.

 If you are an unexperienced user of the chain saw,

you should practice cutting logs on a saw-horse or

cradle before using the chain saw without these

supporting tools.

 The chain saw has a high starting current and should

be connected to a robust power supply. The chain

saw should be connected to a power source with

an impedance of Zsysmax=0.12+0.08j or less.

Please consult your electricity provider or authority if

necessary.

INTENDED USE

This chain saw is intended for use to cut wood pieces,

trees and wooden logs in domestic use.

Do not use for any task other than those specified in the

chapter ‘INTENDED USE’. Furthermore, this product is

not intended to be used for professional tree services.



Even with the intended use of the appliance there is

always a residual risk, which can not prevent. According

to the type and construction of the appliance the following

potential hazards might apply:

 Contact with exposed saw teeth of the saw chain

(cutting hazards)

 Access to the rotating saw chain (cutting hazards)

 Unforeseen, abrupt movement of the guide bar

(cutting hazards)

 Flung out of parts from the saw chain (Cutting /

injection hazards)

 Flung out of parts of the work piece

 Inhalation of work peace particles

 Skin contact with the fuel oil

 Loss of hearing, if no required ear protection used

during work.

Содержание

Похожие устройства

English Original instructions is released the spring loaded limb may strike the operator and or throw the chain saw out of control Use extreme caution when cutting brushes and saplings The slender material may catch the saw chain and be whipped toward you or pull you off balance Carry the chain saw by the front handle with the chain saw switched off and away from your body When transporting or storing the chain saw always fit the guide bar cover Proper handling of the chain saw will reduce the likelihood of accidental contact with the moving saw chain Follow instructions for lubrication chain tensioning and changing accessories Improperly tensioned or lubricated chains may either break or increase the chance for kickback Keep handles dry clean and free from oil and grease Greasy oily handles are slippery and can causing the loss of control Cut wood only Do not use chain saw for purposes not intended For example do not use the chain saw for cutting plastic masonry or non wood building materials Use of the chain saw for operations different than intended can result in a hazardous situation Causes and operator prevention of kickback a Kickback may occur when the nose or tip of the guide bar touches an object or when the wood closes in and pinches the saw chain in the cut b Tip contact in some cases may cause a sudden reverse reaction kicking the guide bar up and back towards the operator c Pinching the saw chain along the top of the guard bar may push the guide bar rapidly back towards the operator d Either of these reactions may cause you to lose control of the saw which could result in serious injury Do not rely exclusively upon the safety devices built into your saw As a chain saw user you should take several steps to keep your cutting jobs free from accident or Injury e Kickback is the result of tool misuse and or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below 1 Maintain a firm grip with thumbs and fingers encircling the chain saw handles with both hands on the saw and position your body and arm to allow you to resist kickback force Kickback forces can be controlled by the operator if proper precautions are taken Do not let go of the chain saw 2 Do not overreach and do not cut above shoulder height This helps to prevent unintended tip contact and enables better control of the chain saw in unexpected situations 3 Only use replacement bars and chains specified by the manufacturer Incorrect replacement bars and chains may cause chain breakage and or kickback 4 Follow the manufacturer s sharpening and maintenance instructions for the saw chain Decreasing the depth gauge height can lead to increased kickback It is recommended to use a residual current device with a tripping current of 30mA or less Ensure that the power cord and the extension cord of the chain saw cannot become entangled in branches or any other objects during the usage of the chain saw If you are an unexperienced user of the chain saw you should practice cutting logs on a saw horse or cradle before using the chain saw without these supporting tools The chain saw has a high starting current and should be connected to a robust power supply The chain saw should be connected to a power source with an impedance of Zsysmax 0 12 0 08j or less Please consult your electricity provider or authority if necessary INTENDED USE INTENDED USE This chain saw is intended for use to cut wood pieces trees and wooden logs in domestic use Do not use for any task other than those specified in the chapter INTENDED USE Furthermore this product is not intended to be used for professional tree services RESIDUAL RISKS Even with the intended use of the appliance there is always a residual risk which can not prevent According to the type and construction of the appliance the following potential hazards might apply Contact with exposed saw teeth of the saw chain cutting hazards Access to the rotating saw chain cutting hazards Unforeseen abrupt movement of the guide bar cutting hazards Flung out of parts from the saw chain Cutting injection hazards Flung out of parts of the work piece Inhalation of work peace particles Skin contact with the fuel oil Loss of hearing if no required ear protection used during work 14

Скачать