BMW R850 1100GS (2000) Инструкция по эксплуатации онлайн [47/464] 114465

00.39

•

[RT] Remove the flap at the bottom of the right

fairing.

•

Connect the BMW Synchrotester,

BMW No. 13 0 800, to the vacuum

bores in the throttle stub pipes.

•

Ride the motorcycle until the engine is warm, or

alternatively allow it to warm up at a standstill for

approx. 10 minutes.

e Caution:

The engine must not run for more than

20 minutes when the motorcycle is not moving.

Oil temperature:................................at least 90 °C

(FID: at least 5 bars)

•

Switch on the Synchrotester and select the bar

chart display with maximum resolution..

L Note:

If the differences between the individual col-umns

are very large (greater than 5 mm), switch to graph

display and compare the cylinders; carry out fault di-

agnosis if necessary.

a See BMW Synchrotester diagnosis instructions.

•

Rectify any faults found.

•

Set idle speed using recirculating air screws

while maintaining synchronous running.

L Note:

Make sure that both throttle valves are closed.

Idle speed: ................................... 1000

150

min

-1

e Caution:

The sealed stop screws on the throttles must not be

tampered with, or else the basic idle flow setting will

have to be reset by the manufacturer.

RS130050

RS130060