D-Link DGS-3630-28SC [652/742] Firmware upgrade from rcp

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

640

To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from FTP, as

shown below:

Figure 15-4 Firmware Upgrade from FTP Window

The fields that can be configured are described below:

Parameter Description

Unit

Select the Switch unit that will be used for this configuration here.

FTP Server IP

Enter the FTP server IP address here. When select the IPv4 option, enter the

IPv4 address of the FTP server in the space provided. When the IPv6 option is

selected, enter the IPv6 address of the FTP server in the space provided.

TCP Port

Enter the TCP port number used for the FTP connection here. The range is from

1 to 65535.

User Name

Enter the user name used for the FTP connection here. This name can be up to

32 characters long.

Password

Enter the password used for the FTP connection here. This password can be up

to 15 characters long.

VRF Name

Enter the name of the VRF instance here. This name can be up to 12 characters

long.

Source File

Enter the source filename and path of the firmware file located on the FTP server

here. This field can be up to 64 characters long.

Destination File

Enter the destination path and location where the new firmware should be stored

on the Switch. This field can be up to 64 characters long.

Click the Upgrade button to initiate the firmware upgrade.

Firmware Upgrade from RCP

This window is used to initiate a firmware upgrade from an RCP server.