Zyxel V301-T1 [121/240] Phone settings
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Zyxel V301-T1 [121/240] Phone settings

Zyxel V301-T1 [121/240] Phone settings
Chapter 11 Phone Setup
V300 Series User’s Guide
121
Each field is described in the following table.
Table 30 VoIP > Phone > Phone Settings
LABEL DESCRIPTION
Volume Control
Ring Volume Select this to set the volume of the V300’s ringtone.
0 is the quietest and 12 is the loudest.
Speaker Rx
Volume
Select this to set the internal speakerphone’s inbound volume. This
controls both the internal speaker and the internal microphone.
0 is the quietest and 12 is the loudest.
Phone RX
Volume
Select this to set the handset’s inbound volume. This controls both the
handset’s speaker and its microphone.
0 is the quietest and 12 is the loudest.
Headset RX
Volume
Select this to set the inbound volume of an attached headset (or any
device connected to the external speaker and/or microphone sockets).
This controls both the handset’s speaker (earpiece) and its microphone.
0 is the quietest and 12 is the loudest.
Speaker Tx
Volume
Select this to set the internal speakerphone’s outbound volume. This
controls both the internal speaker and the internal microphone.
0 is the quietest and 12 is the loudest.
Phone Tx
Volume
Select this to set the handset’s outbound volume. This controls both the
handset’s speaker and its microphone.
0 is the quietest and 12 is the loudest.
Headset Tx
Volume
Select this to set the outbound volume of an attached headset (or any
device connected to the external speaker and/or microphone sockets).
This controls both the handset’s speaker (earpiece) and its microphone.
0 is the quietest and 12 is the loudest.
Ring Setting
Ring Type Select the ring tone you want to use for the V300. These are the same
options as available on the phone itself through the Advanced Setting
> Ring Setting menu. (For information, see Section 6.10 on page 78
for more information.)
Voice Active Detection
VAD Support Select this if the V300 should stop transmitting when you are not
speaking. This reduces the bandwidth the V300 uses.
RTCP Support
RTCP
Support
Select this option if you want the V300 to transmit its connection
statistics to the IP PBX. Doing this may increase the device’s bandwidth.
A single device should not make much of an impact but enough devices
on a network using RTCP could.
When activated, the VoIP Statistics screen displays more
comprehensive data based on the data gathered with RTCP.
Dialing Interval Select

Содержание

Похожие устройства

Скачать