![Konica Minolta bizhub PRO 920 [126/980] Troubleshooting tips](/img/pdf.png)
Konica Minolta bizhub PRO 920 [126/980] Troubleshooting tips
![Konica Minolta bizhub PRO 920 [126/980] Troubleshooting tips](/views2/1122005/page126/bg7e.png)
5
Troubleshooting
5-14 bizhub PRO 920
5.7 Troubleshooting Tips
Main Body
Case Checkpoint Remedy
The machine does not
operate even if the main
power switch and sub
power switch are on.
Is the power plug firmly in-
serted in wall socket?
Firmly insert the power plug in wall
socket.
Is the Power Save LED on? The machine cannot be turned on
due to the Weekly Timer function.
See page 2-28 to operate Timer In-
terrupt, or consult your administrator.
Copying does not be-
gin after pressing
[Start].
Is front door or left side door
of the machine open?
Securely close the front door and left
side door of the machine.
Is there appropriate paper
size in a tray?
Load the paper size selected for the
original.
Is the print quantity entered
properly?
Enter an appropriate number for print
quantity.
Is the Finisher door open? Securely close the Finisher door.
Is the Trimmer unit front door
or Trimmer stacker cover
open?
Securely close the Trimmer unit front
door and Trimmer stacker cover.
Copy image is not
clean or shows spots.
Is the original glass clean? Wipe the glass, if necessary.
Is the original document
clean?
Erase spots on the original, if any.
Is the copy density adjusted
properly?
Manually specify copy density to se-
lect the appropriate exposure level.
If further adjustment is required, see
p. 15-3.
Copy image is too light. Is the copy density adjusted
properly?
Manually specify copy density to se-
lect the appropriate exposure level.
If further adjustment is required, see
p. 15-3.
Is the message "Please add
toner" displayed?
Add toner.
Copy quality is poor. Is copy paper damp? Replace the paper, if necessary.
Consult your service representative.
Magnification cannot
be changed.
Is Reduce&Shift function se-
lected?
Release Reduce&Shift mode.
Copying does not
resume after mishan-
dled paper is removed.
Is any mishandled paper left? Check copier diagram on touch panel
for additional indications of mishan-
dled paper.
Duplex modes cannot
be selected.
Is ADF open? Fully close ADF.
Using user authentica-
tion, copies cannot be
made after password is
entered.
Is the message "Copy limit
reached" displayed?
Contact your administrator.
Содержание
- Bizhub pro 920 1
- Operator manual 1
- Automatic duplex copying 3
- Energy star program 3
- Introduction 3
- Low power 3
- About the firmware version display function 4
- Acknowledgements 4
- The control software version is as follows 4
- Contents 5
- Precautions for installation and use 5
- Preparation for use 5
- Paper and original information 6
- Supplies handling 6
- Maintenance 7
- Troubleshooting 7
- Before making copies 8
- Specifications 8
- Basic job settings 9
- Original setting 9
- Applications 10
- Finishing paper fold 11
- Job management 12
- Advanced information 13
- Paper setting 13
- Controller setting 14
- Pagescope web connection setting 17
- Web utilities setting 17
- Security functions 18
- Administrator security functions 19
- Enhanced security mode 19
- Hdd store function in enhanced security mode 19
- Protect and delete data after use 19
- User authentication in enhanced security mode 19
- Appendix 20
- Meaning of symbols 23
- Precautions for installation and use 23
- Safety information 23
- Warning and precaution symbols 23
- 4 bizhub pro 920 24
- Precautions for installation and use 24
- Bizhub pro 920 1 5 25
- Precautions for installation and use 25
- 6 bizhub pro 920 26
- Precautions for installation and use 26
- Bizhub pro 920 1 7 27
- Precautions for installation and use 27
- 8 bizhub pro 920 28
- Precautions for installation and use 28
- For denmark users 29
- For finland sweden users 29
- For norway users 29
- Laser safety 29
- Regulation notices 29
- Electromagnetic interference 30
- For european users 30
- For german users 30
- Ozone release 30
- 12 bizhub pro 920 32
- Caution labels and indicators 32
- Precautions for installation and use 32
- The caution labels and indicators are attached to the machine areas as shown below where you are advised to pay special attention to avoid any dangerous situations or serious injury 32
- Bizhub pro 920 1 13 33
- Caution 33
- Precautions for installation and use 33
- Installation space 34
- For eu member states only 36
- Operating environment 36
- Operation precautions 36
- Plug socket 36
- Bizhub pro 920 2 3 39
- External machine items 39
- Machine configuration 39
- Preparation for use 39
- 4 bizhub pro 920 40
- Preparation for use 40
- 3 4 5 6 41
- Bizhub pro 920 2 5 41
- Caution 41
- Internal machine items 41
- Preparation for use 41
- The internal fixing unit is very hot to avoid getting burned do not touch 41
- 6 bizhub pro 920 42
- Preparation for use 42
- Standard optional equipment 42
- 17 16 15 14 13 12 1110 43
- 8 7 6 5 4 3 2 1 43
- Bizhub pro 920 2 7 43
- Control panel layout 43
- Preparation for use 43
- 8 bizhub pro 920 44
- Caution 44
- If the service call screen is displayed copier operations cannot be continued any more stop the operation to prevent any unexpected accident write down the report code then switch off the machine and disconnect from the power socket contact your service representative and inform them of the report code 44
- Preparation for use 44
- The touch panel of the control panel is covered with glass do not drop heavy objects on the glass or put excess weight or pressure on it otherwise the glass may break or scratched and you may be injured 44
- Basic screen 45
- Bizhub pro 920 2 9 45
- Direct selection screen 45
- Layer selection screen 45
- Preparation for use 45
- The basic screen can also be changed to the direct selection screen which allows you to view other basic settings while making a setting change for details contact your service representative 45
- This machine provides a layer selection screen as the basic screen touching a screen key will display the subsequent screen specific to that function for manual setting 45
- 10 bizhub pro 920 46
- Preparation for use 46
- Bizhub pro 920 2 11 47
- Large capacity unit lu 403 large capacity unit lu 404 47
- Large capacity unit lu 403 lu 404 47
- Preparation for use 47
- 12 bizhub pro 920 48
- Preparation for use 48
- Bizhub pro 920 2 13 49
- Finisher fs 509 49
- Finisher fs 509 punch kit pk 504 505 49
- Preparation for use 49
- Reminder the primary main tray gradually goes down while printed materials output do not allow any object to interfere with the operation of the tray on the left side of the finisher as any interference may cause damage to the finisher 49
- 14 bizhub pro 920 50
- Finisher fs 509 punch kit pk 504 505 50
- Preparation for use 50
- Bizhub pro 920 2 15 51
- Finisher fs 604 51
- Finisher fs 604 punch kit pk 504 505 51
- Preparation for use 51
- 16 bizhub pro 920 52
- Finisher fs 604 punch kit pk 504 505 52
- Preparation for use 52
- Reminder the primary main tray gradually goes down while printed materials output do not allow any object to interfere with the operation of the tray on the left side of the finisher as any interference may cause damage to the finisher 52
- Bizhub pro 920 2 17 53
- Preparation for use 53
- 18 bizhub pro 920 54
- Post inserter pi 501 54
- Preparation for use 54
- Bizhub pro 920 2 19 55
- Preparation for use 55
- Z folding unit zu 601 602 55
- 20 bizhub pro 920 56
- Do not use the stacker for storage the tray inside the stacker slides to the left while finished sets are delivered impeding the movement may cause an unexpected trouble 56
- Preparation for use 56
- Reminder do not place heavy objects on the trimmer stacker or apply any weight on it excessive weight applied to the inside or outside of the trimmer stacker will damage the equipment 56
- Trimmer unit tu 501 56
- Bizhub pro 920 2 21 57
- Preparation for use 57
- To turn on the power 58
- Turning on off the power switch 58
- To turn off the power 60
- To use machine when power save led lights 61
- Low power 62
- Using power save manually 63
- When weekly timer is activated 64
- Making authentication 66
- To make authentication 67
- Paper and original information 71
- Paper information 71
- 4 bizhub pro 920 72
- Be sure to load only the paper type specified for that tray such as thick thin or tab paper 72
- Detail the paper type setting for trays 1 to 4 is described in paper setting on page 15 3 72
- Paper and original information 72
- Paper weight 72
- Reminder the tray specified as tab paper cannot be used in duplex copying 72
- See loading tabbed sheets in tray on page 4 10 for loading tabbed sheets in main body trays and multi sheet bypass tray 72
- The paper type setting for multi sheet bypass tray is described in copying using special paper bypass tray setting on page 9 16 72
- Bizhub pro 920 3 5 73
- Note see the following tables for tray capacity for staple and z fold with staple modes 73
- Paper and original information 73
- Tray exit tray capacity 73
- 6 bizhub pro 920 74
- Paper and original information 74
- Primary main tray capacity for staple and z fold modes using finisher fs 509 604 74
- Primary main tray capacity for staple mode using finisher fs 604 74
- Bizhub pro 920 3 7 75
- Note finisher fs 509 is provided with two types of staple cartridge using 50 sheet staple cartridge up to 50 sheets can be stapled using 100 sheet staple cartridge up to 100 sheets can be stapled primary main tray capacity depends on the paper size and number of stapled sheets heed the limits by referring to the table below 75
- Paper and original information 75
- 8 bizhub pro 920 76
- Paper and original information 76
- Paper size 76
- Bizhub pro 920 3 9 77
- Detail when setting wide size to the multi sheet bypass tray be sure to specify the precise dimensions of paper to be used see copying using special paper bypass tray setting on page 9 16 for details 77
- Detailed information of paper sizes are f4 203 330 mm a3 297 420 mm b4 257 364 mm a4 210 297 mm b5 182 257 mm a5 148 210 mm 77
- Note if any size other than a4 lu 403 a3 lu 404 is desired contact your service representative 77
- Paper and original information 77
- Reminder be sure to use paper only of the size specified for the tray especially when specified as one of the sizes in original size detection custom or wide paper 77
- Caution 78
- Special paper in multi sheet bypass tray 78
- To store copy paper 78
- Caution 79
- Original information 79
- Using original glass 79
- Adf originals 80
- Loading paper 85
- Supplies handling 85
- Loading paper in tray 1 2 and 3 87
- Loading paper in multi sheet bypass tray 89
- Loading paper in lcu lu 403 lu 404 90
- Loading tabbed sheets in tray 92
- Loading tabbed sheets in tray 1 2 and 3 92
- 12 bizhub pro 920 94
- Close the lcu top door 94
- Detail to load the tabbed sheets into lcu contact your service representative to position the rear stopper for the paper size to be loaded 94
- Load the tabbed sheets into the lcu as illustrated above 94
- Loading tabbed sheets in lcu lu 403 lu 404 94
- Open the lcu top door 94
- Press the paper loading button to lower the lcu bottom plate 94
- Supplies handling 94
- The tab extension width should be 12 mm or less 0 be sure that the machine is powered on before loading paper in the lcu without the power turned on the lcu bottom plate will not function 94
- Adjust the paper guides to the paper size 95
- Bizhub pro 920 4 13 95
- Detail see copying using special paper bypass tray setting on page 9 16 for specifying the paper type of the multi sheet bypass tray 95
- Load tabbed sheets as illustrated above 95
- Loading tabbed sheets in multi sheet bypass tray 95
- Open the multi sheet bypass tray 95
- Specify the paper type for the multi sheet bypass tray 95
- Supplies handling 95
- The tab extension width should be 12 mm or less 95
- Adding toner 96
- Caution 96
- Warning 96
- To exchange toner bottle 97
- Inserting a new staple cartridge into finisher fs 509 99
- To add staples 99
- Inserting a new staple cartridge into finisher fs 604 103
- To add staples 103
- Empty waste basket of punch kit pk 504 505 107
- To empty waste basket 107
- Empty waste basket of z folding unit zu 601 602 109
- To empty waste basket 109
- Empty waste basket of trimmer unit tu 501 111
- To empty waste basket 111
- Caution 115
- If please call service message is displayed 115
- To contact service representative 115
- Troubleshooting 115
- Caution 116
- Limited use of the copier in trouble 116
- Clearing mishandled paper 117
- To remove mishandled paper 117
- Caution 118
- If job list changes to mishandled paper 119
- If job list changes to mishandled paper or no paper 119
- If job list changes to no paper 119
- To change the tray selection 120
- To supply the empty tray with paper 122
- If memory full message is displayed memory overflow 123
- If power off on screen is displayed 124
- To turn off on the power 124
- If no response screen is displayed 125
- To turn off on the power 125
- 14 bizhub pro 920 126
- Main body 126
- Troubleshooting 126
- Troubleshooting tips 126
- Bizhub pro 920 5 15 127
- Finisher with punch kit 127
- Troubleshooting 127
- Z folding unit 127
- 16 bizhub pro 920 128
- Reminder if remedies mentioned above do not work contact your service representative 128
- Trimmer unit 128
- Troubleshooting 128
- Cleaning image scanning section 131
- Cleaning the adf scanning glass 131
- Cleaning the original glass 131
- Maintenance 131
- Cleaning the adf guide cover 132
- Checking copy count 133
- To check and print the counter list 133
- Preventive maintenance 135
- Bizhub pro 920 7 3 139
- Main body 139
- Main body specifications 139
- Specifications 139
- 4 bizhub pro 920 140
- Specifications 140
- These specifications are subject to change without notice 140
- Bizhub pro 920 7 5 141
- Effective size width including primary main tray will be 668 mm 825 mm with the tray edge extended 141
- Finisher fs 509 141
- Option specifications 141
- Specifications 141
- 6 bizhub pro 920 142
- Effective size width including primary main tray will be 675 mm 791 mm with the tray edge extended 142
- Finisher fs 604 142
- Specifications 142
- Bizhub pro 920 7 7 143
- Post inserter pi 501 143
- Punch kit pk 504 505 143
- Specifications 143
- 8 bizhub pro 920 144
- Large capacity unit lu 403 144
- Large capacity unit lu 404 144
- Specifications 144
- Z folding unit zu 601 602 144
- Accessories expanded memory unit em 701 image controller ic 203 postscript kit ps 503 mount kit mk 707 145
- Bizhub pro 920 7 9 145
- Specifications 145
- These specifications are subject to change without notice 145
- Trimmer unit tu 501 145
- Before making copies 149
- Features of the bizhub pro 920 149
- How to make a basic copy 154
- To make a basic copy 154
- Positioning originals 157
- Positioning originals in adf 157
- To position originals in normal mode 157
- To position originals in mixed original mode 158
- To position originals in z folded mode 160
- Caution 161
- Positioning original on original glass 161
- To position original on original glass 161
- Setting print quantity 162
- To set print quantity 162
- To change print quantity 163
- Setting job during warmup 164
- To set job during warmup 164
- To stop scanning or printing job 166
- To stop scanning printing 166
- Basic job settings 171
- Bizhub pro 920 9 3 171
- Copy conditions incompatible with basic settings 171
- 4 bizhub pro 920 172
- Basic job settings 172
- Basic job settings 173
- Bizhub pro 920 9 5 173
- 1 prohibited to start the job operation withz the message comination of this modes unavailable displayed 174
- 2 compatible only when print insertion is selected 174
- 6 bizhub pro 920 174
- Automatically released 174
- Basic job settings 174
- N selectable but inefficient 174
- None compatible 174
- P operation cannot be started 174
- X grayed out no response when touched 174
- Selecting exposure level and adjusting background whiteness 175
- To adjust exposure level and background whiteness 176
- Paper condition 178
- Paper size 178
- Paper tray setting 178
- To select paper size automatically auto paper select 179
- To set auto paper select 180
- Basic job settings 181
- Bizhub pro 920 9 13 181
- Reminder auto paper select may not function for the tray of the selected size due to the paper type weight specified for that tray contact your administrator 181
- See the table below for the relation of original size magnification ratio and copy paper size 181
- To set auto zoom 182
- To specify desired paper size auto zoom 182
- Basic job settings 183
- Bizhub pro 920 9 15 183
- Position original s then press start 183
- Scanned image will be printed on the specified paper size in the magnification ratio automatically selected 183
- See the table below for the original size copy paper size and magnification ratio automatically selected 183
- Copying using special paper bypass tray setting 184
- To use multi sheet bypass tray 185
- Copying in full size mode 192
- Changing magnification ratio 193
- To set zoom mode 193
- Making double sided copies using adf 198
- Simplex duplex 198
- Making double sided copies using original glass 201
- Making single sided copies from double sided originals 204
- Separate scan mode 207
- To set separate scan mode 207
- Reserve job setting 210
- To set reserve job 210
- Bizhub pro 920 10 3 215
- Copy conditions incompatible with original settings 215
- Original setting 215
- 4 bizhub pro 920 216
- Original setting 216
- Bizhub pro 920 10 5 217
- Original setting 217
- 1 prohibited to start the job operation withz the message comination of this modes unavailable displayed 218
- 2 application function previously selected will be released with the key grayed out 218
- 3 pi setting menu will appear when any cover mode key is selected selecting main body tray will be unavailable 218
- 4 all main body tray keys will be grayed out on the setting screen for in sertin sheets 218
- 6 bizhub pro 920 218
- None compatible 218
- Original setting 218
- X grayed out no response when touched 218
- Combine originals 219
- Lay out several pages onto one sheet combine pages 219
- Original 221
- Specifying original direction original direction 221
- Selecting binding direction of originals bind 223
- Copying mixed size originals mixed original 225
- Copying z folded originals z folded 227
- Feeding single original from adf single feed 229
- Procedure in normal single feed mode 229
- Procedure in auto start mode 231
- Copying non standard size originals custom size tab paper 233
- Making copy quality closer to originals original type 235
- Original image type 235
- To specify original type 236
- Applications 239
- Bizhub pro 920 11 3 239
- Copy conditions incompatible with applications 239
- 4 bizhub pro 920 240
- Applications 240
- Applications 241
- Bizhub pro 920 11 5 241
- None compatible 241
- Release the one previously selected 241
- X grayed out no response when touched 241
- 1 unavailable with print insertion selected 242
- 2 pi setting menu will appear when any cover mode is selected selecting main body tray will be unavailable 242
- 3 available only when booklet pagination adhesive binding is selected 242
- 4 available only grayed out when booklet adhesive binding front back cov er spread is selected 242
- 6 bizhub pro 920 242
- Applications 242
- Application screen 243
- To set application function 243
- Applications 245
- Bizhub pro 920 11 9 245
- Inserting sheets and covers insert sheet 245
- The covers and insertions can be specified as copied or blank and fed from different tray source for each post inserter is also available as tray source if post inserter pi 501 option is installed 245
- Use insert sheet in print mode or blank mode to insert chapter sheets or separator sheets into the finished set as well as front and back covers 245
- To set insert sheet function 246
- Locating title pages on the front side chapters 251
- To set chapters function 251
- Inserting images into printed sets insert image 254
- To set insert image function 254
- Copying onto transparent films ohp interleave 258
- To set ohp interleave function 258
- Programming different settings for an output job program job 261
- To set program job function 261
- 28 bizhub pro 920 264
- Applications 264
- Dividing a page spread into right and left pages book copy 264
- Note touch booklet on the book copy screen to use booklet pagination function together with book copy 264
- The book copy mode performs image division on the original image use the function to copy an open book or catalogue onto two sheets in 1 1 or 2 1 mode or onto the front and back sides of one sheet in 1 2 or 2 2 mode the following three modes can be selected from the book copy screen 264
- To set book copy function 265
- 32 bizhub pro 920 268
- Applications 268
- Detail use original glass for scanning original cover see the illustrations below for details 268
- Repeating selected image area image repeat size manual input 269
- To set size manual input mode of image repeat 269
- Repeating automatically or select repeating times image repeat size auto detect repeat 272
- To set size auto detect and repeat modes of image repeat 273
- Making multiple page signature booklet booklet pagination 277
- To set booklet pagination function 278
- Reversing colour in black and white image neg positive reverse 281
- To set neg positive reverse function 281
- Adjusting position of copy image page margin shift mode 283
- To set shift mode of page margin 284
- Applications 289
- Bizhub pro 920 11 53 289
- Reducing images to create binding margin page margin reduce shift mode 289
- Use reduce shift mode instead of shift mode to prevent image loss when creating a binding margin 289
- To set reduce shift mode of page margin 290
- Eliminating black copy marks along borders frame centre erase 292
- To set frame centre erase function 292
- Erasing outside of original non image area erase 295
- To set non image area erase function 295
- Copying image in the centre of copy paper image centring 298
- To set image centring function 298
- Printing images fully to the edges full scan 301
- To set full scan function 301
- Copying without image rotation no rotate 303
- To set no rotate function 303
- Applications 305
- Bizhub pro 920 11 69 305
- Printing stamp distribution number page number date time onto copies stamp 305
- The application screen will be displayed 305
- The four stamp types and two watermark types described in the next section provided on the stamp image overlay screen can be used individually or in multiple combinations 305
- This function allows you to print onto output copies the desired type of stamp distribution number page number and date time at the location designated on the screen 305
- To set stamp function 305
- Touch application 305
- Printing watermark onto copies watermark 315
- To set watermark function 315
- 84 bizhub pro 920 320
- Annotation can be used with the four stamp types and two watermark types provided on the stamp overlay selection screen in multiple combinations 320
- Applications 320
- C b c b 320
- Printing words date time annotation number onto copies annotation 320
- This function allows you to register words current date time and annotation number as a set and to print it onto output copies at the location designated on the screen the setting previously made for annotation number in the utility setting can be changed temporarily on the annotation screen temporary number setting 320
- To set annotation function 320
- Up to 40 combinations of words date time and annotation number can be registered administrator can change the indicating order of words date time and annotation number and select whether to print for each in the utility mode 0 the date time is determined when the machine starts scanning originals and will be printed according to the type specified on the machine 0 the annotation number is counted for each scanned original in scanning order and will continue to the next job even if the machine power is turned off then on however the serial count will be suspended if this function is deselected or temporary number setting is specified 0 printing position can be selected from 9 positions and fine adjustment is available within 0 to 50 mm both in up down and right left directions 320
- Overlay an image onto each page copied in the job image overlay 324
- Specifications for image overlay 324
- Specifications for program image overlay 327
- Storing image on hdd overlaying stored image program image overlay 327
- Bizhub pro 920 12 3 335
- Copy conditions incompatible with finishing paper fold modes 335
- Finishing paper fold 335
- 4 bizhub pro 920 336
- Finishing paper fold 336
- Bizhub pro 920 12 5 337
- Finishing paper fold 337
- 6 bizhub pro 920 338
- Finishing paper fold 338
- N selectable but inefficient 338
- None compatible 338
- X grayed out no response when touched 338
- Setting binding direction for duplex copies 339
- To set binding direction for duplex copies 339
- Setting output face and order 342
- To set output face and order 342
- Sorting stapling copies 344
- To set finishing mode 346
- Making folded booklet half fold fold staple trimming 350
- To make folded booklet 350
- Folding copies in three letter fold in letter fold out 353
- To fold copies in three 353
- Output z folded copies z fold 355
- To make z folded copies 355
- Punching file holes in copies punch 357
- To punch file holes in copies 357
- Cover sheet feeding post inserter 360
- To attach cover sheet to copies 360
- Using finisher manually 362
- To use finisher manually 363
- Using two copiers in tandem 365
- To use two copiers in tandem 366
- To cancel the tandem copying job 371
- To stop scanning printing 371
- To cancel the job on the tandem machine only 372
- Copying with the distribution recovery mode 373
- Troubleshooting 373
- When a paper jam sc code e code f code trouble or unloaded paper occurs on either the master or tandem machine 373
- When memory overflow occurs on either the master or tandem machine 373
- When the power is turned off on either the master or tandem machine 373
- Job management 377
- Overview of job list screen 377
- To display job list screen 377
- Job operation for reserved jobs 378
- Job operation on job list screen 378
- To check control reserved jobs 378
- Displaying output history 380
- To display output history 380
- Displaying send history 381
- To display send history 381
- Checking incomplete jobs 382
- To check incomplete jobs 382
- Job operation for suspended jobs 383
- To check operate suspended jobs 383
- Job operation for spool jobs 385
- To check control spool jobs 385
- Advanced information 389
- Checking feature selections by proof copying 389
- To make a proof copy 389
- Checking feature selections before copying check mode 391
- To use check mode 391
- Interrupt copying 395
- To use interrupt mode 395
- Storing and recalling job conditions mode memory 397
- Storing job conditions 397
- To store job conditions 397
- Recalling stored job settings 400
- To recall stored job settings 400
- Recalling previous job settings 402
- To recall previous job settings 402
- Displaying screen for operation guide help mode 404
- To display help screen 404
- Adjusting response time of touch keys accessibility 406
- To adjust response time 406
- Adjusting touch panel contrast contrast 407
- To adjust contrast 407
- Controlling copier from browser remote panel 408
- To control copier from browser 408
- Paper setting 413
- Paper setting outlines 413
- Setting items in paper setting 413
- Paper type specifications 414
- 1 the tray setting is required by your service representative 415
- Bizhub pro 920 15 5 415
- Copying speed 1 printing speed is 92 sheets per minute when printing a4 8 11 in the simplex print mode 415
- Copying speed 2 printing speed is 59 sheets per minute when printing a4 8 11 in the simplex print mode 415
- Paper setting 415
- Paper type and weight 415
- Recommended setting of tray 416
- Recommended setting procedure 416
- Change tray setting 417
- Change size setting 422
- Controller setting 431
- Function overview 431
- 4 bizhub pro 920 432
- Available with option 432
- Controller setting 432
- Report type use the function to print out the report type selected from the screen see 01 report type on page 16 9 432
- The menu comprises the following settings 432
- Bizhub pro 920 16 5 433
- Controller setting 433
- Detail it may not operate properly depending upon the combination of settings selected 433
- Printer setting various printer settings are available from this screen see 02 printer set ting on page 16 11 433
- The following default settings are used unless otherwise specified by the printer driver 433
- 6 bizhub pro 920 434
- Controller setting 434
- Bizhub pro 920 16 7 435
- Controller setting 435
- For the details of the symbol set see the appendix 435
- 1 port no 9100 etc is the initial setting to change the setting see 03 select printer setting on page 16 18 436
- 8 bizhub pro 920 436
- Controller setting 436
- Interface setting set the timer to terminate the interface see 05 interface setting on page 16 21 436
- Select printer setting select the default port number and specify the output format for each port see 03 select printer setting on page 16 18 436
- Spool select to spool the job to hdd see 04 spool on page 16 20 436
- 01 report type 437
- 02 printer setting 439
- 03 select printer setting 446
- 04 spool 448
- 05 interface setting 449
- User setting outlines 453
- Utility user setting 453
- 4 bizhub pro 920 454
- List of the user setting 454
- Bizhub pro 920 17 5 455
- 6 bizhub pro 920 456
- Bizhub pro 920 17 7 457
- 8 bizhub pro 920 458
- Bizhub pro 920 17 9 459
- 10 bizhub pro 920 460
- For detailed setting description of tray setting refer to change tray setting on page 15 7 460
- Pi setting on page 18 60 460
- 1 system setting 461
- Language setting 461
- Buzzer setting 1 buzzer on off volume setting 463
- Buzzer setting 2 buzzer for job stop setting 465
- Shot indication time 467
- Panel reset timer setting 468
- Sub area display on off 469
- Key response time 471
- Change user password 472
- Warm up screen on off 476
- 2 function setting 477
- Feed tray setting 1 feed tray auto selection 477
- Feed tray setting 2 ats permission 479
- Feed tray setting 3 auto paper type selection 481
- Each function setting fine adjust margin 483
- Each function setting print prohibit timer 484
- Each function setting offset auto select 486
- Density setting 1 density shift for original image type 487
- Density setting 2 user density setting 489
- Density setting 3 photo mode density setting 492
- Density setting 4 image density selection 494
- Preset zoom 496
- Tandem setting 1 tandem sub machine one time data read 497
- Tandem setting 2 tandem sub machine wait proof 499
- Tandem setting 3 tandem sub machine shift data setting 501
- Tandem setting 4tandem selection after job completion 503
- Tandem setting 5 distribution recovery 505
- 3 copier setting 507
- Reset setting 1 initial setting 507
- Reset setting 2 reset function setting 509
- Reset setting 3 initial by key counter insert 511
- Each function setting 513
- 4 scanner setting 516
- Default address setting 516
- Each function setting 518
- 5 touch panel adjust 522
- Administrator setting outlines 527
- How to access the administrator setting menu 527
- Utility administrator setting 527
- 6 bizhub pro 920 530
- List of the administrator setting 530
- Bizhub pro 920 18 7 531
- 8 bizhub pro 920 532
- Bizhub pro 920 18 9 533
- 10 bizhub pro 920 534
- Bizhub pro 920 18 11 535
- 12 bizhub pro 920 536
- 1 system setting 537
- Power save setting 537
- Date time setting 540
- Weekly timer setting 542
- Weekly timer setting 1 weekly timer on off setting 543
- Weekly timer setting 2 time setting 545
- Weekly timer setting 3 date setting 549
- Weekly timer setting 4 select time for power save 551
- Weekly timer setting 5 password for non business hours setting 554
- Print management list 557
- Prohibit user operation 562
- Expert adjustment non image area erase setting 566
- Expert adjustment adf frame erasure setting 569
- Expert adjustment finisher adjust 571
- Expert adjustment timing adjustment 575
- Expert adjustment centring adjustment 578
- Size setting 581
- Paper setting 1 tray setting 584
- Paper setting 2 pi setting 584
- Lcd backlight setting 587
- Annotation setting 589
- 2 administrator machine register 598
- Administrator registration 598
- 3 user authentication account track 600
- General settings 1 user authentication 600
- General settings 2 account track 603
- Account track setting 606
- User authentication setting 616
- Non register output setting 627
- 4 network setting 629
- Machine nic setting 629
- Bizhub pro 920 18 107 631
- List of ip nic setting 631
- List of the network settings specify the settings for connecting a network printer and network scanner and the settings for tcp ip raw port numbers ip filter permission denial and ping for details refer to page 18 122 631
- Specify the controller settings various default settings or network settings can be customized as required 631
- 108 bizhub pro 920 632
- Specify the settings for connecting network printer and the netware settings for details refer to page 18 126 632
- Bizhub pro 920 18 109 633
- 110 bizhub pro 920 634
- Specify the settings for connecting network printer and the ipp settings for details refer to page 18 130 634
- Bizhub pro 920 18 111 635
- Specify to use scan to hdd scan to ftp for transmission the proxy server setting and the passive function for details refer to page 18 133 635
- 112 bizhub pro 920 636
- Specify the settings for connecting network printer and the appletalk settings for details refer to page 18 141 636
- Specify the smb printing setting and to use scan to smb for transmission for details refer to page 18 138 636
- Specify the snmp settings for details refer to page 18 136 636
- Bizhub pro 920 18 113 637
- Specify the settings for an e mail send receive division for transmitted data and authentication and save the template of titles and bodies frequently used for details refer to page 18 143 637
- 114 bizhub pro 920 638
- Bizhub pro 920 18 115 639
- Specify the alert mail settings for detail refer to page 18 153 639
- Specify the duration before automatically deleting scan to hdd data for details refer to page 18 151 639
- 116 bizhub pro 920 640
- Specify the csrc settings for details refer to page 18 156 640
- Bizhub pro 920 18 117 641
- 118 bizhub pro 920 642
- Specify the network setting clear setting for details refer to page 18 167 642
- Specify the pswc page scope web connection setting for details refer to page 18 165 642
- Specify the settings for third party applications for details refer to page 18 162 642
- Bizhub pro 920 18 119 643
- Specify the ldap setting for details refer to page 18 169 643
- 120 bizhub pro 920 644
- Specify the snmp trap setting for details refer to page 18 175 644
- Bizhub pro 920 18 121 645
- Ip nic setting 1 tcp ip 646
- Ip nic setting 2 netware 650
- Ip nic setting 3 ipp 654
- Ip nic setting 4 ftp 657
- Ip nic setting 5 snmp 660
- Ip nic setting 6 smb 662
- Ip nic setting 7 appletalk 665
- Ip nic setting 8 e mail 667
- Ip nic setting 9 hdd 675
- Ip nic setting 10 alert mail 677
- Ip nic setting 11 csrc 680
- Ip nic setting 12 ap i f 686
- Ip nic setting 13 pswc 689
- Ip nic setting 14 network setting clear 691
- Ip nic setting 15 ldap 693
- Ip nic setting 16 snmp trap 699
- 5 copier printer setting 704
- Job offset mode 704
- Continuous print print 706
- Change page number print pos booklet 708
- Fixing prerotation set 709
- Auto image rotation 711
- Suspend interruption 713
- Reserve copy function 715
- Suspend scanning when tray is pulled 717
- Continuous print copy 719
- Face up down for 1 sheet 720
- Single feed auto setting 721
- 6 system connection 722
- System connection 1 call service centre 722
- 7 security setting 724
- Administrator password 724
- Hdd manage setting 1 details delete 727
- Hdd manage setting 2 data auto delete 731
- Hdd manage setting 3 hdd lock password changing 733
- Enhance security mode 737
- 8 scanner destination storage 739
- Destination address change delete 739
- Web utilities outlines 751
- Web utilities setting 751
- Setting account track data 753
- Adding account track 754
- Editing account track data 757
- Remote panel setting 768
- Setting scan transmission function 771
- Transmitting machine setting file 777
- Specifications for each machine setting file type 783
- Box edit 785
- Pagescope web connection outlines 793
- Pagescope web connection setting 793
- System requirements 793
- Access 795
- Operation 795
- Screen configuration 796
- Bizhub pro 920 20 7 797
- Pagescope web connection setting 797
- Logging in using administrator mode 798
- Administrator mode 800
- Administrator password 800
- System tab 800
- Device information 801
- Online assistance 802
- Rom version 802
- Import export 804
- Maintenance 805
- Alert mail 807
- Port settings 808
- Print tab 808
- Default settings 809
- Scan tab 812
- Subject registration 812
- To enter edit subjects 813
- To delete subjects 814
- Body registration 815
- To enter edit body 815
- To delete bodies 816
- Network tab 817
- Tcp ip 817
- Netware 819
- Appletalk 827
- To check ldap setting 829
- E mail 830
- If a certificate is not installed creating a self signed certificate 832
- Ssl tls 832
- If a certificate is not installed requesting a certificate to instal 834
- If a certificate has been installed requesting a certificate to switch information 838
- Changing mode settings changing encryption strength setting 841
- Changing mode using ssl tls 843
- Removing a certificate 845
- Authentication 847
- Ap i f 848
- Enhanced security mode 851
- Environments in which enhanced security mode is recommended 851
- Normal mode 851
- Security functions 851
- Creating a secure environment 852
- Description of enhanced security mode 855
- Enhanced security mode 855
- Data protected by enhanced security mode 857
- Data that is not protected in enhanced security mode 857
- To turn enhanced security mode on off 857
- Display when enhanced security mode is on 858
- Protect and delete data after use 861
- Description of user authentication 865
- User authentication in enhanced security mode 865
- To register a new user 867
- To change a user data 872
- To delete a user 877
- To change password by user 881
- Hdd store function in enhanced security mode 889
- Store the data in a box while copying 890
- Store scanned data in a box 895
- Recall delete data in a box 900
- Output data in the secure box 906
- Outputting secure printing using a pc printing on the machine 906
- Secure printing using a pc 906
- Administrator security functions 913
- Turn enhanced security mode on off 914
- Hdd lock password 917
- Print audit log 924
- Analyze audit log 928
- Audit log information 928
- Administrator security functions 929
- Bizhub pro 920 26 19 929
- Table of items saved in audit log 929
- Specify unauthorized actions actions other than password authentication under security 930
- Specify unauthorized actions password authentication 930
- About keys on the character input screen 935
- Appendix 935
- As you touch the item where you can input characters the character input screen appears you can input alphabets and signs character array is the same with computer keyboards 935
- Bizhub pro 920 27 3 935
- How to input characters 935
- Keys on the character input screen are described here 935
- About character input 936
- Appendix 937
- Bizhub pro 920 27 5 937
- Setting data for import export 937
- System 937
- 6 bizhub pro 920 938
- Appendix 938
- Appendix 939
- Bizhub pro 920 27 7 939
- Network 939
- 8 bizhub pro 920 940
- Appendix 940
- Appendix 941
- Bizhub pro 920 27 9 941
- Configuration setting 942
- Demo page 946
- Pcl font list 954
- Symbol set 957
- Appendix 963
- Bizhub pro 920 27 31 963
- Glossary 963
- 32 bizhub pro 920 964
- Appendix 964
- Appendix 965
- Bizhub pro 920 27 33 965
- Numerics 969
Похожие устройства
- Opel ASTRA GTC MY 12.5 (2012) Инструкция по эксплуатации
- Konica Minolta bizhub PRO 920P Инструкция по эксплуатации
- Konica Minolta bizhub PRO 950 Инструкция по эксплуатации
- Opel ASTRA GTC MY 12.0 (2012) Инструкция по эксплуатации
- Konica Minolta bizhub PRO 951 Инструкция по эксплуатации
- Opel ASTRA MY 12.5 (2012) Инструкция по эксплуатации
- Benq BL2201M Инструкция по эксплуатации
- Opel ASTRA FAMILY MY 12.0 (2012) Инструкция по эксплуатации
- Benq BL2201PT Инструкция по эксплуатации
- Opel ASTRA FAMILY MY 11.5 (2011) Инструкция по эксплуатации
- Benq BL221TM Инструкция по эксплуатации
- Opel ASTRA FAMILY MY 11.0 (2011) Инструкция по эксплуатации
- Benq BL2211TM Инструкция по эксплуатации
- Opel ASTRA FAMILY MY 10.5 (2010) Инструкция по эксплуатации
- Benq BL2400PT Инструкция по эксплуатации
- Opel ASTRA FAMILY MY 10.0 (2010) Инструкция по эксплуатации
- Benq BL2405HT Инструкция по эксплуатации
- Opel CORSA MY 9.5 (2009) Инструкция по эксплуатации
- Benq BL2411PT Инструкция по эксплуатации
- Opel CORSA MY 10.5 (2010) Инструкция по эксплуатации