Kawasaki WORKHORSE 250 (2003) [194/322] 16 final drive

11-16 FINAL DRIVE

Output Bevel Gear Case

Cam Damper Inspection

•

Visually inspect:

Bevel Gear Cam [A]

Cam Follower [B]

Spring [C]

Shaft [D]

Replace any part if it appears damaged.

Ball Bearing Inspection

•

Since the ball bearings are made to extremely close toler-

ances, the wear must be judged by feel rather than mea-

surement. Clean each bearing in a high-flash point sol-

vent, dry it (do not spin the bearing while it is dry), and oil

it with engine oil.

•

Spin the bearing by hand to check its condition.

If the bearing is noisy, does not spin smoothly, or has any

rough spots, replace it.

Oil Seal Inspection

•

Inspect the oil seals.

Replace it if the lips are misshapen, discolored (indicat-

ing that the rubber has deteriorated), hardened, or been

otherwise damaged.