Kawasaki WORKHORSE 250 (2003) [33/322] Periodic maintenance 2 13

PERIODIC MAINTENANCE 2-13

Periodic Maintenance Procedures

○

Apply grease to the O-ring [A] in the cover.

•

Tighten:

Torque - Oil Filte r Cover Bolt s: 8.8 N·m (0.9 kgf·m, 78 in·lb)

○

Pour in the specified type and amount of oil.

Wheels/Tires

Tire Inspection

•

Examine the tire for damage and wear.

If the tire is cut or cracked, replace it.

○

Lumps or high spots on the tread or sidewalls indicate

internal damage requiring tire replacement.

○

Remove any foreign objects from the tread. After re-

moval, check for leaks with a soap and water solution.

•

Measure the tread depth at the center of the tread with

a depth gauge. Since the tire may wear unevenly, take

measurements at several places.

If any measurements are less than the service limit, re-

place the tire.

Tire Tread Depth

Service Lim it:

Front:

4 mm (0.16 in.)

Rear: 4 mm (0.16 in.)

Standard Tire

Front:

AT 21 x 8 - 9 DUNLOP KT856 Tubeless

Rear: AT 22 x 10 - 10 DUNLOP KT857 Tubeless