Ski-Doo Ski Doo MX Z 2005 [883/1429] Battery

Ski-Doo Ski Doo MX Z 2005 [883/1429] Battery
Section 01 MAINTENANCE
Subsection 02 (STORAGE)
BATTERY
Remove battery, clean its tray and its exterior sur-
face. Charge battery as explained in BATTERY
section.
FUEL STABILIZER
With the new fuel additives, it is critical to use
the fuel stabilizer (250 mL) (P/N 413 408 600) to
prevent fuel deterioration, gum formation and fuel
system components corrosion. Follow manufac-
turers instructions for proper use.
Pour fuel stabilizer in fuel tank prior to starting
engine so that stabilizer lubricate all fuel system
components. Fill up fuel tank completely. Ensure
there is no water inside fuel tank.
CAUTION: Should any water be trapped inside
fuel tank, severe internal damage will occur to
the fuel injection system (if so equipped).
On so equipped models, after engine starting, use
primer several times so that stabilizer flows inside
it.
Do not drain fuel system.
CAUTION: Fuel stabilizer should be added prior
to engine lubrication to ensure carburetor pro-
tection against varnish deposit.
WARNING
Fuel is flammable and explosive under cer-
tain conditions. Always work in a well ven-
tilated area. Do not smoke or allow open
flames or sparks in the vicinity. Fuel tank
may be pressurized, slowly turn cap when
opening. Never use an open flame to check
fuel level. When fueling, keep vehicle level.
Do not overfill or top off the fuel tank and
leave vehicle in the sun. As temperature
increases, fuel expands and might overflow.
Always wipe off any fuel spillage from the
vehicle. Periodically inspect fuel system.
ENGINE LUBRICATION
NOTE: Be sure to add fuel stabilizer before start-
ing the engine.
Engine internal parts must be lubricated to protect
them from possible rust formation during the stor-
age period. To protect appropriately the engine
use storage oil (Canada) (P/N 413 711 600) or stor-
age oil (United States) (P/N 413 711 900).
Proceed as follows:
Start the engine and allow it to run at idle speed
until the engine reaches its operating tempera-
ture.
WARNING
Ensure the track is free of all particles which
could be thrown out while it is rotating. Keep
hands, tools, feet and clothing clear of track.
Ensure no one is standing in close proximity
to the vehicle.
Stop the engine.
Models with a Primer
To prevent fuel from draining, primer button
should be pushed all the way in.
Disconnect the outlet primer hose from the primer
valve (straight coupling).
A17C0EA
1
2
1. Straight coupling
2. To intake manifold
Insert storage oil nozzle into primer outlet hose.
Models with a Choke
Remove air silencers to spray storage oil into each
carburetor bore.
All Models
Restartengineandrunatidlespeed.
Inject storage oil until the engine stalls or until a
sufficient quantity of oil has entered the engine
(approximately half a can).
With the engine stopped, remove the spark plug
and spray storage oil into each cylinder.
4 mmr2005-003

Содержание

Скачать